BaseX Canopy: Standard features              8 Sizes: 180, 200, 225, 245, 265, 280, 300, 325             7 Cell F-111 – Span wise and tail reinforcement.             Hidden line attachment points             Floating stabilzer attachment points             Tail Pocket – Tail Gate                 Red Control and Center “C” and “D” lines  Options              Mesh Vents – We have designed something that we feel is a more suitable solution.  Our vents use large mesh instead of small, allowing for quicker inflation and pressurization.  We also only have vents on the cells off the center cell, creating more of a center canopy inflation.  We also don’t have vents or covers of any kind.  Since these vents are not on the outer two cells of each side, when you fly in deep brakes or when your flairing, there is no air loss or depressurization since there aren’t any vents in these cells.  We have a total of 576 square inches of vents compared to almost 1500 square inches of vents of the other competitors.  Having one third of the vent area, our design doesn’t lose as much performance as the others With only the two 12”x 24” vents, it barely adds an extra bulk .  Plus our vents are less expensive.              1/3 ZP Upper Skin - For quicker nose inflation.              5th Control Line – This additional control line adds more control and flair power especially on the slider down or no slider jumps.              Black Dacron lines – Cause they’re COOL.              Sliders – Small Mesh, Large Mesh or Sail slider for the terminal skydives.